Florescence ship rubber airbag complies with ISO 14409. Ship airbag can be used to launch and upgrade a ship up to 100,000DWT. Comparing to the traditional slipway launching method, the ship launching airbags are much environmental, because ship airbag can launch a ship at any seaside, there's no need to worry about the construction of launching facilities; besides, the marine airbags need little maintenance and can be used repeatedly.
Florescence ship rubber airbag complies with ISO 14409. Ship airbag can be used to launch and upgrade a ship up to 100,000DWT. Comparing to the traditional slipway launching method, the ship launching airbags are much environmental, because ship airbag can launch a ship at any seaside, there's no need to worry about the construction of launching facilities; besides, the marine airbags need little maintenance and can be used repeatedly.
Size Range:(airbag size depend on ship size)
Diameter(D): From 0.6m to 2.8 m
Effective Length(EL): From 5.0m to 25.0 m
Total Length(TL): From 7.0m to 28.0 m
Standard Number of Layers: Usually 3-10 layers
How has the technology advanced since then?
Over the past twenty years, the airbag ship launching system has made advancements in not only the airbag, but also the ship launching/landing technology. The first generation airbags used a rubber dipped canvas as a reinforcement layer to form the air chamber trunk. Two cone-shaped molds were then used to make the ends and everything was stuck together.
With today’s airbags, the whole-enlacing-technology used for manufacturing is done together. Rubber dipped synthetic-tyre-cords are used as the reinforcement layers with the trunk and two cone-shaped ends made at the same time.Everything is then-laced together, so the airbag doesn’t have any joints. Due to the development of rubber chemistry, the performance of the rubber employed in the latest airbags is highly enhanced and about 15 times that of the first generation bag with the same specifications.
The launching and landing technology has also developed. In the beginning, only small and flat bottom ships located on a fabricated slope could be launched with airbags. Now this technology is more flexible and less limited by the ship and landform. Now any type of ship with a DWT below 55,000 and in a place with enough launching space can be launched using airbags. The launching slope even can be sloped upward. It has really developed into a cutting edge technology for launching ships, and especially useful for some marine emergencies.
Product Tags:
|
|
Ship Launching Rubber Airbag Marine Rubber Air Bag For Sale Images
|
